Teckno Fusion Automation Pvt Ltd

• High efficiency
• Easy operations
• Outstanding quality

• Plug-in intelligent drive module for machine control
• Powerful MINT® multitasking programming
• CAN open manager for system expansion
• Non-volatile RAM for user data storage and Flash program storage
• Control of one auxiliary closed loop analogue axis
• Compact solution, requiring less panel space and wiring
• Elimination of external controller or PLC saving cost and reducing complexity
• Real-time Ethernet technology
• CAN interface for I/O expansion and HMI interfaces. Can be used to provide full peer-to-peer networking capabilities with other MINT based controllers
• Multitasking programming capability with MINT.
• Comprehensive move types including: linear, circular and helical interpolation; software cams; flying shears; splines; synchronization with positional offsets and virtual axes
• ActiveX libraries supplied free of charge
• Compatible with MINT-NC and HPGL

Specifications:

• Temperature: 20 to 125^oc
• Voltage: 5 V

• Dimensionally accurate
• High efficiency
• Easy operations

Specifications:

• Voltage: 24 V
• Current: 4 mA

Additional Information:

• Item Code: e100

• Outstanding performance
• Durable
• Intricately designed

• PCI short card (7 inches) compliant to PCI Local Bus specification v2.2. Not compatible with PCI Local Bus specification v3.0, PCI-Express, PCI-X, Mini PCI, Compact PCI or PCI-104
• 100-pin high density EMC compliant connector interfacing to optional breakout board
• 32-bit 120MHz Digital Signal Processor (DSP) offering over twice the performance of the Next Move PCI motion controller
• Up to 8 axes of control on one card - 4 servo and 4 stepper
• 20 uncommitted PNP/NPN isolated digital inputs
• Programmable for hardware limits, home input, stop input and error input. 4 of the inputs can be programmed for high speed capture of position with 1 microsecond
• 12 uncommitted opto-isolated digital outputs. PNP or NPN options available
• Programmable for drive enable and high speed position compare output
• 24 V/150 mA relay output to signal system error conditions
• 4 x 12-bit uncommitted analog inputs
• Master encoder input for synchronization
• 32 kByte Dual Port RAM (DPR) interface with host interrupt capability
• CAN interface for I/O expansion and HMI interfaces conforming to CAN open DS301. Can be used to provide full peer-to-peer networking capabilities with other MINT based controllers.
• Multitasking programming capability with MINTMT. Number of tasks limited only by available memory
• Comprehensive move types including: linear, circular and helical interpolation; software cams; flying shears; splines; synchronization with positional offsets and virtual axes
• ActiveX libraries supplied free of charge
• Compatible with Windows 9x/ME/NT4.0/2000/XP/Vista
• Compatible with MINT-NC and HPGL

Specifications:

• Current: 150 mA
• Voltage: 24 V
  

• Outstanding quality
• Durable
• Easy operations

• Ethernet powerlink for real-time control of up to 16 axes of interpolated motion
• Control of additional Ethernet powerlink devices, including drives, I/O and encoders
• Compatible with MicroFlex e100 - providing a complete motion control solution
• Integrated Ethernet hub for ease of wiring - simple daisy chain units together
• Panel mount configuration with two part connectors
• 32-bit 120MHz Digital Signal Processor
• 1MByte SRAM for user programs and data
• 1MByte FLASH for firmware and user program storage
• 32kByte FRAM for non-volatile parameter storage
• On board control for 3 axes of servo & 4 axes of stepper (pulse and direction)
• 20 uncommitted PNP/NPN opto-isolated digital inputs
• Programmable for hardware limits, home input, stop input and error input. 4 of the inputs can be programmed for high speed capture of position within 1 microsecond
• 12 uncommitted PNP opto-isolated digital outputs
• Programmable for drive enable and high speed position compare output
• Uncommitted 12-bit analog output
• RS232 & RS485 (User selectable. 115,200 Baud) and USB programming interfaces
• USB drivers compatible with Windows 2000/XP
• CAN interface for I/O expansion and HMI interfaces. Can be used to provide full peer-to-peer networking capabilities with other Mint based controllers
• Multitasking programming capability with Mint. Number of tasks limited only by available memory
• Comprehensive move types including: linear, circular and helical interpolation; software cams; flying shears; splines; synchronization with positional offsets and virtual axes
• ActiveX libraries supplied free of charge
• Compatible with MintNC and HPGL

Specifications:

• Voltage: /-10V
• Current: 150mA relay output to signal system error conditions
• Analog inputs: 2 x 12-bit uncommitted analog inputs

Additional Information:

• Item Code: E100

• Dimensionally accurate
• Durable
• Intricately designed

• Panel mount configuration with two-part connectors and D-type connector for encoder connections
• 1MByte SRAM for user programs and data
• 1MByte flash for firmware and user program storage
• 32kByte fram for non-volatile parameter storage
• Product variants available for 3 or 4 axes of servo control and 4 axes of stepper control MicroFlex can be used in step and direction mode for additional 'open loop' servo axes)
• 20 PNP/NPN opto-isolated digital inputs
• Programmable for hardware limits, home input, stop input and error input. 4 of the inputs can be programmed for high speed capture of position with 1 microsecond
• Two auxiliary encoder interfaces for position following or position verification with 3-axis servo variant. One additional auxiliary encoder interface for 4-axis servo variant
• USB programming interface
• RS232 (115,200 Baud) and (optional RS485)
• CAN interface for I/O expansion and HMI interfaces. Can be used to provide full peer-to-peer networking capabilities with other MINT based controllers
• Multi-tasking programming capability with MINT-MT. Number of tasks limited only by available memory
• Comprehensive move types including: linear, circular and helical interpolation; software cams; flying shears; splines; synchronization with positional offsets and virtual axes
• ActiveX libraries supplied free of charge
• Compatible with MINT NC and HPGL
• RoHS compliant

Specifications:

• Digital outputs: 12 PNP
• Voltage: 24 V
• Current: 150 mA relay output to signal system error conditions
• Input: 2 x 12-bit analog inputs

Additional Information:

• Item Code: 8-Axis